The Remote Control; Inserting Or Removing Media - Panasonic DMPBDT100EG Bedienungsanleitung

STEP 6 :
Reprogramming the
remote control
For other Panasonic products
If you have more than one Panasonic player/recorder and
the remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. After changing the remote control
code on this product, you will need to change the code of the
remote control. ( 31, "Remote Control")
For TV or amplifier/receiver
You can operate the TV or amplifier/receiver using the unit's
remote control.
1
For televisions
Input the 2-digit code (
number buttons while pressing [Í TV].
For amplifiers/receivers
Input the 2-digit code (
number buttons while pressing
[RECEIVER j VOL].
e.g., 01: [0] [1]
2
Test by turning on the television or
adjusting the volume of the amplifier/
receiver.
≥ If your television or amplifier/receiver brand has more than one code
listed, select the one that allows correct operation.
42) with the
42) with the
Inserting or removing
Playback Playback
media
≥ When inserting a media item, ensure that it is facing the
right way up.
≥ When the indicator on this unit's display blinks, do not turn
off the unit or remove the media. Such action may result in
loss of the media's contents.
≥ When removing the SD card, press on the centre of the
card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be displayed on
the connected equipment. For details, refer to the
instructions for the connected equipment.
∫ To switch drives
Press [DRIVE SELECT] to select "BD/DVD/CD", "SD
card" or "USB device".
≥ If media is inserted while the unit is stopped, the drive
switches automatically depending on the inserted media.
15
(15)
VQT2U34