Magnat QUANTUM 607 Bedienungsanleitung Seite 10

GB
MAGNAT QUANTUM CENTER 613
The Quantum Center 613 loudspeaker visually and acoustically ideally matches the other
Quantum 600 models. The loudspeaker is placed immediately on or under the television
set. Otherwise please adhere to the general recommendations outlined in the previous
chapters.
MAGNAT BETASUB SUBWOOFERS
The active subwoofers of the Betasub line acoustically ideally match the loudspeakers
in the Quantum series. Please refer to the separate operating instructions supplied with
this product.
CONNECTING TO AN AV RECEIVER
Figs. 5 and 6 show two different methods of connecting to AV receivers.
Fig. 5: AV receiver without subwoofer output.
Fig. 6: AV receiver with subwoofer output.
MAINTENANCE
The surface is best cleaned with a mild household cleaner. On no account use furniture
polish or similar products on these surfaces.
HOW TO AVOID DAMAGE TO YOUR VALUABLE SPEAKERS
All MAGNAT loudspeakers are designed and built for optimum sound reproduction with
the tone controls in the central position – i.e. with "linear" amplifier output. Turning up the
bass and treble controls too far delivers more power to the woofers and/or tweeters, and
at high volumes this can actually destroy the speaker units!
If the output of your amplifier is significantly higher than the rated power handling capacity
of your speakers extremely high volumes can physically destroy your speakers. This
doesn't actually happen often but you should be aware that it is possible.
Weak amplifiers with low output ratings can actually be more dangerous for your
speakers at medium volumes because weak amplifiers may overload much faster than
powerful ones and this causes measurable and audible distortion, which is extremely
dangerous to your loudspeakers.
10