Zanussi ZWF71440W Benutzerhandbuch Seite 11

LIQUID OR POWDER DETERGENT
A
B
When you use the liquid detergent:
• Do not use gelatinous or thick liq-
uid detergents.
• Do not put more liquid then 120
ml.
• Do not set the delay start.
A
SETTING A PROGRAMME
1. Turn the programme knob to switch the
appliance on and set the programme:
The indicator of the button Start/Pauze Départ/
Pause flashes.
2. If necessary, change the temperature and the
spin speed or add available options.
When you activate an option, the indicator of the
set option comes on.
The default position of
the flap is A (powder de-
tergent).
To use liquid detergent:
1. Remove the drawer.
Push the drawer edge in
the place with the arrow
(PUSH) to remove the
drawer easily.
2. Adjust the flap in posi-
tion B.
3. Put back the drawer in
the recess.
When the flap is in posi-
tion B and you want to
use powder detergent:
1. Remove the drawer.
2. Adjust the flap in po-
sition A.
3. Put back the drawer
in the recess.
If you set something incorrect, the
indicator of button
STARTING A PROGRAMME WITHOUT THE
DELAY START
Press the button Start/Pauze Départ/Pause.
The corresponding indicator stops to flash.
The phase indicator
The programme starts and the door locks.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
STARTING A PROGRAMME WITH THE DELAY
START OPTION
1. Press the button Startuitstel/Départ différé
repeatedly to set the required delay.
The indicator of the set delay comes on.
2. Press the button Start/Pauze Départ/Pause:
• The door is locked.
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the delay
setting before you press the button
Start/Pauze Départ/Pause. After
pressing the button Start/Pauze
Départ/Pause, you can only cancel the
delay.
To cancel the delay start:
a. Press the button Start/Pauze Départ/
Pause to set the appliance to pause.
The corresponding indicator flashes.
b. Press the button Startuitstel/Départ différé
once; the indicator of the set delay goes
off.
Press the button Start/Pauze Départ/
Pause again to start the programme
immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Press the button Start/Pauze Départ/Pause.
The indicator flashes.
2. Change the options.
3. Press the button Start/Pauze Départ/Pause
again.
The programme continues.
flashes red.
illuminates and stays on.
11