CO/Tech DCHT201B Bedienungsanleitung Seite 10

Assembly
Note: It is very important that the cutter
bar attachment is twisted on in the correct
direction as described below. If the cutter
bar is twisted in the wrong direction you will
not be able to twist it back again.
1. Align the parts of hedge trimmer so
that the two arrows point to each
other.
3. Twist the cutter bar attachment until
the arrow points to the lock symbol.
A clicking sound indicates that
the assembly has been successful.
Once assembled, the cutter bar can only
be twisted clockwise away from the lock
symbol, it cannot be twisted back so that
the arrows point to each other again.
Front handle with safety lock
and hand guard
Attach the front handle assembly
onto the hedge trimmer using the two
included screws.
2. Join the two parts so that
the arrows meet.
10