Pelgrim PVS3102N Benutzerinformation Seite 23

5. Remove the correct part from the hinge
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in op-
posite case.
6. Attach the covers (C, D) to the lugs and
the hinge holes.
Attach the hinge covers (E) to the hinge.
C
D
E
7. Disconnect the parts (Ha), (Hb), (Hc) and
(Hd).
8. Install the part (Ha) on the inner side of
9. Push the part (Hc) on the part (Ha).
E
10. Open the appliance door and the kitchen
Ha
Hc
the kitchen furniture.
ca. 50 mm
ca. 50 mm
Ha
Hc
furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
23
Hb
Hd
90°
21 mm
90°
21 mm