Cleaning - Aquapur Z31136 Bedienungsanleitung

Never apply too much pressure. In this way the
lint and pilling are shaven off and are kept in the
lint container.
Note: We recommend that you do not operate
the device for more than about 2 minutes in one
session.
Select between different height settings by turn-
ing the glide piece
7
You may select the settings H (high), M (middle)
and L (low).

Cleaning

Never put the device in water for
cleaning.
Always switch off the device before cleaning it,
then open the battery compartment
Remove the batteries
partment to prevent accidentally switching the
device on.
Then pull the protective cover
device.
ATTENTION: When removing lint remains, be
careful not to damage the cutting blade
The lint container should be emptied regularly!
4
1. Lint container: Pull off the lint container and
empty it. The lint container
should never be more than
3 / 4 full.
10 GB/IE
towards the left or right.
cover.
8
from the battery com-
9
off of the
6
.
1