Kompernass KH1919 Bedienungsanleitung Seite 9

The appliance may not come into contact with moisture. Therefore, do not
use the lint remover on moist fabrics.
1. Lay the textile on a fl at surface, such as an ironing board. Ensure that
the surface to be processed has no wrinkles. Otherwise, the textile
could be damaged.
2. Turn the distance spacer 3 to the desired position or remove it com-
pletely (see Chapter "Removing/replacing the spacer"):
- "Thick" with large bobbles and coarse textiles (large spacing to the cutter
knives)
- "Thin" with small lint/bobbles and fi ne textiles (small spacing to the cutter
knives)
- Remove the spacer, only for very fi ne lint (virtually no spacing to the cutter
knives).
3. Using the On/Off switch/Speed switch 2, switch the lint remover to
the speed level I
- 8 -