CLEANING AND CARE
• Switch the device off before cleaning.
• Remove dust with a soft dust cloth.
• Do not use any wet sponges, wax, polish sprays or abrasives.
• Caution: Water must not penetrate the inside of the housing. If this
does happen, let it dry out thoroughly before putting it into operation
again. Do not place this device into an oven or microwave oven to
dry it.
TECHNICAL DATA
Battery operation
95
125 m
YS1393_A6_LED Flashlight_170427.indb 12
Splashproof
Light current* (lumen) 95
Luminous range*
4.5 V
, 3 Type AAA 1.5 V
batteries (included)
IPX3
* Light current (lumen)
and maximum luminous
range (in meters)
measured at the highest
setting upon switching
on with fresh alkaline
125 m
batteries.
12
26/4/17 2:30 pm