Phottix Ares Flash Trigger Benutzerhandbuch Seite 6

Fire All Channels Switch
1. To re all ashes or strobes on receivers set to
di erent channels press the Fire All Button on
the transmitter.
2. The Channel Numbers 1 to 8 will illuminate.
3. All nearby Ares receivers set to any channel in
standby mode will
strobes.
4. To turn o Fire All mode press the Fire All
Button. The channel selection will revert to its
previous setting.
Connecting the transmitter to the
camera hot shoe
1. Turn o the camera and Phottix Ares transmit-
ter.
2. Slide the Ares transmitter into the camera's
6
re connected ashes/
hot shoe mount.
3. Turn the Ares locking ring until tight.
4. Turn on the camera, Ares transmitter and set
the shooting mode to Manual.
Raising and Lowering the
Transmitter
The Phottix Ares transmitter can be used in an
up or down position.
1. To lower the transmitter: After mounting,
gently push the Ares transmitter forward to use
in the down position. The transmitter will lock
in place in the down position.
2. To raise the transmitter: gently pull the Ares
transmitter up. The transmitter will lock in
place in the up position.