Channel Pool (For Advanced Users) - Philips dsr 2000 Bedienungsanleitung

4.1.3 Channel pool (for advanced users)

The channel pool contains all channels in alphabetical order. Selection depending on satellite is
done using the M key; free or encrypted channels are chosen by pressing the TV key. All free
(or all encrypted) channels on the selected satellite are contained in the «All Free» section, also
the new free or encrypted channels after performing satellite search mode.
W V
All selected channels are set immediately by the receiver and indicated in the background. In the
case of scrambled channels the relevant CA module must be provided. The screen transparency
can be changed using the F key and (within 2 seconds) the
OK
M
TV
G
R
i
If necessary, you can align your parabolic antenna using the sub-menu «Antenna signal». Turn
the antenna to the optimum position in the scales indicating field strength and signal reception
quality.
If the signal is very weak, the field strength scale may also fall to 0 - in which case you should
optimise the signal using the reception quality scale.
If the message «No signal» appears and only the field strength signal is indicated, the antenna
may be aligned with a satellite for analogue signals (which cannot be received by this receiver).
14
Select channels in rows.
The channel names preset by the transmitting stations can be supplemented or
amended individually after pressing the OK key.
Selection of satellite using the M key.
Selection of free or encrypted channels using the TV key.
After pressing the MUTE key, individual channels can be deleted - e.g. channels that
are no longer on the air.
The channel pool activated using the M and TV keys can be managed here, i.e. all
«unused» channels or also all indicated channels can be deleted.
(Cf. MANAGING under point 4.5.2)
Show antenna signal and reception parameters.
C B
Select channels in columns.
C B
or key.