Selecting The Language; Timer - Philips dsr 2000 Bedienungsanleitung

3.6 SELECTING THE LANGUAGE

Press the A key to display the language selection menu. The number of available languages
depends on the particular channel. The choice of language is made as usual using the
V
keys.
The language originally set remains selected when you quit the menu using the E key.
The selected language is stored when you quit the menu using the OK key.
Ready for UFO mini, UFO micro.
N.B.:

3.7 TIMER

The timer programming menu is accessed by pressing the
input for TV or radio channels, as required.
N.B.:
N.B.:
r E c
E n d
1...8
BC
OK
OK
E
If the data for timer programming are transmitted, they can also be transferred directly to
the timer via the menu 'EPG... preview' using the
Deleting timer programming:
1...8
OK
N.B.:
N.B.:
10
Please note that many channels only offer one language. Many radio stations
do, however, offer up to 20 or more «sub»-channels. These channels can be
selected in radio mode also by pressing the A key.
Please note that the video recorder must also be set to identical recording times.
Please note that the remote control is not active during timer recording to prevent
accidental recording of OSD messages. The volume is switched to full level during
recording.
If the remote control is activated, the channel indicator on the unit displays «r E c»
to indicate that a timer recording is currently active.
The timer recording can be interrupted prematurely only via the
interrupting the recording, the display indicates «End». The unit then reverts to
normal operation.
If a timer recording is started from standby mode, the unit reverts to standby mode
after the recording has finished.
Select the next free input field using the number keys 1 ... 8 or using the
Select consecutively the input fields for {Date} {Start} {Stop} and {Channel} (the input
field is highlighted in white).
Activate the input for the selected field using the OK key (the input field is highlighted in
black).
Input the appropriate event either directly via the number keys 0 ... 9 or by scrolling
through the options using the
Confirm your selection using the OK key and select the next input field.
After inputting {Date} {Start} {Stop} and {Channel}, you can exit the timer menu by
pressing E and quit or input further timed events. You can also programme the timer for
radio programmes in the Programme section using the R key.
Select the timer row to be deleted using the number keys 1 ... 8 or the
and delete the programmed data using the OK key.
If you accidentally delete a row and wish to reconstitute the original information,
exit the timer menu by pressing the E key twice.
The time and date are programmed from the DVB data transmitted by the
channel. Please correct the 'Time offset' in the Installation menu when
switching from summer to winter time and vice versa.
CET summer time = {+2 h}
CET winter time = {+1 h}
Please note that some 'exotic' channels do not transmit correct time signals.
Check the date and time in the 'Timer programming' menu when performing
programming.
N
key. Up to 8 timer events can be
B C
keys.
N
key.
W
and
N
key. After
W V
or keys.
W V
or key