Instructions For Use; Control Panel; Troubleshooting Guide - Bauknecht EKIO 6640 IN Bedienungsanleitung

INSTRUCTIONS FOR USE

Control panel

Cooking zone positioning
Power levels
CLEANING
WARNING
IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass.
• After each use, clean the hob (when it is cool) to remove any deposits and stains due to food residuals.
• Sugar or foods with a high sugar content damage the hob and must be immediately removed.
• Salt, sugar and sand could scratch the glass surface.
• Use a soft cloth, absorbent kitchen paper or a specific hob cleaner (follow the Manufacturer's instructions).

TROUBLESHOOTING GUIDE

• Read and follow the instructions given in the section "Instructions for use".
• Make sure there is not a power outage.
• Dry the hob thoroughly after cleaning it.
Cooktop operation
lamp
Level selector
No function
- Do not use steam cleaners.
- Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator
("H") is not displayed.
Switching on and adjusting cooking zones
After positioning the pot on the chosen cooking zone, select the required power
level by turning the knob clockwise. Each cooking zone has different heat
settings, ranging from "1" (minimum power) to "9" (maximum power).
When a knob is set to a power setting between 1 and 9 the hob indicator light
switches on.
Important! At the position indicated by a "______" on the cooktop knobs
there is no function: the heating element is switched off.
Important! If no pot is placed on the hob or if the pot used is not suitable for an
induction hob, the cooking zone selected will switch off after 1 minute. To
reactivate it: place a pot that is suitable for the induction hob (see section "Before
use") on the desired cooking zone, turn the knob to "0" and then select the
desired heat setting.
Switching off cooking zones
Turn the knob to "0".
When all the knobs are set to "0" (or to the line "____") the hob indicator light
switches off.
GB12