Example Set Up - Yamaha MS101 II Bedienungsanleitung

Example Set up

Make sure all your equipment is powered off, then connect the MS101 II s power cable to a suitable AC receptacle. Connect your
other equipment, synthesizer, CD player, etc., to the MS101II, then power on. There are many different ways in which the MS101IIs
can be integrated into an audio system, two examples are shown below.
Microphones are connected to the MIC INPUTs, a keyboard is connected to the LINE 2 input, and a CD player is connected to the
LINE 1 input allowing you to sing and play along with your favorite songs or even your own songs.
Microphone
Synthesizer
In this example, the monitor outputs of a Yamaha MD recorder Multitrack are connected to the LINE 2 inputs on a pair of MS101IIs
for multitrack monitoring.
(Connect to the rear panel LINE INPUTs.)
MS1012
Microphone
Stereo System
(Tape player, CD player, etc.)
Multi-track MD recorder
3
MS1012
Cassette recorder