Rayline Heli Cam Bedienungsanleitung Seite 12

R/C Rayline R20C Heli Cam 2.4 GHz 3-Kanal Helikopter mit Kamera
Trim

If the helicopter should turn without control signal itself, please use the trim to compensate
for this.
Video and photo function

Picture Record
Insert the memory card into the memory card slot of the camera. The status light turns green
before you press the shutter button on the remote when you press them, the status light
flashes red. Is this photo shot changes the status light back to green.

Video recording
Insert the memory card into the memory card slot of the camera. The status light turns green
before you press the shutter button on the remote control. If you now want to record a
video, press the record button on the remote control, then the status light flashes red. Press
the record button again to stop recording. Now, the status light changes back to green.

Retrieving the photos or videos
Now connect the USB cable to the port on the camera and your computer. Now you can view
the data on your PC.

Remove the memory card during recording, it has a loss of data.

Insert or remove the memory card only when the battery is not connected to the helicopter.
Triple Overvoltage Protection

If the battery voltage drops to a critical level, there will be disconnects between helicopter
and remote control. Charge the battery at this point again.

If something is blocking the main rotor, the engine switches off automatically. Now repeat
the connection procedure.
12
Bedienungsanleitung
Tips
If the helicopter rotates
clockwise without a control
signal goes out, use the trim
according to the graph.
If the helicopter is rotating
in the counterclockwise
without a control signal goes
out, use the trim according
to the graph.