Werbung
Bedienung / Instructions
NITconf
- 12 -
NITGen
NIT off ......... no own NIT will be generated,
intern .......... the NIT will be automatically generated
extern* .........external generated (ex. over USB) NIT will be
NITOrg ............................. The parameters TS-ID and Org-NW-ID of the
NETname .........................Network name can be edited
NET-ID .............................Network-ID from the NIT can be edited
ONET-ID .......................... Original-Network-ID from the NIT
TS-ID ............................... TS-ID can be edited, if 0xFFFF has been set the
PAT Mon
on
off
License**
30 days ........shows the remaining days of the external NIT
* NITGen extern:
** License:
Attention:
The displaying of the license runtime only works if the input signal is connected.
The time information will be extracted from the input signal.
NIT configuration
an existing NIT will be passed through
from the module settings (standard)
inserted. The menu will only displayed if a
license is available and the NIT is transferred
to the module
input signal are displayed. These are needed to
create an external NIT.
can edited
TS-ID will be automatically detected
The PAT monitoring monitors the changes
of the version information in the PAT.
In case of a change the PID filter at the
output modulator will be updated (select mode).
In addition, the changes will be adopted for the
decryption. This is in particular needed in the
dynamic change of the transport stream for
example at regional switching.
and the NIT license.
Transfer over OH 50
1. set OH 50 to standby mode
2. insert USB stick with the NIT
3. select NIT transfer
4. select modul
5. select modul channel
6. select NIT file
Transfer license for NIT
1. OH 50 Standby
2. insert USB stick with license
3. select LIC transfer
4. select license file
Werbung
