English; Setting The Temperature - Philips GC7700 series Bedienungsanleitung

ENGLISH

6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that
Philips offers, register your product at www.philips.com/welcome.
Read this user manual, the important information leaflet, and the quick start guide carefully before
you use the appliance. Save them for future reference.
General description (Fig. 3)
1 'Iron ready' light
2 Calc-Clean button with Calc-Clean light
3 Steam trigger
4 Temperature dial
5 Heel
6 Supply hose
7 Cord storage facility
8 On/off switch
9 Carry lock
10 Mains cord
11 Mains plug
12 Hose storage compartment
13 Detachable water tank
14 Filling hole
15 MAX indication
16 Water tank release button
17 Water tank handle
18 Smart Calc-Clean container

Setting the temperature

To set the required ironing temperature, turn the temperature dial to the appropriate position.
The appliance adjusts the steam automatically, depending on the ironing temperature set.
Temperature setting
SYNTH to 1
2
3 to LINEN
Recommended water to use: distilled or demineralised water
Your appliance has been designed to be used with tap water. If you live in an area with hard water,
fast scale build-up may occur. It is therefore recommended to use distilled or demineralised water to
prolong the lifetime of your appliance.
Do not add perfume, water from the tumble dryer, vinegar, ironing aids, chemically descaled
water or other chemicals, as they may cause water spitting, brown staining or damage to your
appliance.
Automatic steam setting Fabric type
Synthetic fabrics (e.g., acetate,
acrylic, nylon, polyamide).
Wool, viscose, polyester and silk.
Cotton, linen