Herunterladen Inhalt Inhalt Diese Seite drucken

Before First Use; Brewing Coffee - Inventum HK 100B Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2 | Before first use
Before you use the coffeemaker for the first time,
please do as follows: carefully unpack the appliance and
remove all the packagingmaterial. Keep the material
(plastic bags and cardboard) out of reach of children.
check after unpacking the appliance for any damage,
possible from transportation. put the appliance on a
cool, flat and stable surface. Before first use, rinse the
appliance once or twice with water (but without coffee).
rinse the glass jug with warm water and make it dry.
never use any abrasives! important: fill the appliance
only with cold water. Hot water has a negative effect on
the lifetime of the coffeemachine.
3 | BreWing coffee
Before plugging into a socket, check that the voltage in
your home corresponds with the voltage printed on the
bottom of the appliance. put the appliance on a cool,
flat and stable surface. Connect the appliance to an
earthed socket. you can adjust the length of the cord by
pulling it out from, or pushing it into, the interior of the
appliance.
Because of the hinged lids of the filterholder and the
waterreservoir the appliance is real easy to use.
To fill the waterreservoir or place a paper filter just lift
the lid. By lifting the filterholder it is unlocked and can
be removed. When you want to place the filterholder
back, make sure that you put it correctly on the bracket.
1. Open the lid of the waterreservoir and fill it with
the desired amount of cold, fresh water (the level
indications apply to the amount of cups).
2. Open the lid of the filterholder and place a paper
filter (size 1 x 4) of which you have folded the sealed
edges. This prevents the paper filter to collapse.
For 10 cups, use 5 or 6 spoons of ground coffee.
3. Close the lid of the filterholder.
4. place the jug on the warming plate.
5. Switch the coffeemaker on with the switch on the side
of the appliance.
The pilotlamp will now light up. The warmingplate
under the jug will get warm automatically.
6. the water will slowly be brought to the boil and will
run through the filter. You can follow this process
through the glass tube in the waterreservoir.
This appliance heats the water with the
boilerprinciple. The water will be brought up to the
boil with short periods of time and run through the
coffee in the filter.
7. as soon as the brewing proces has ended and the
waterreservoir is empty, you can serve the coffee.
Let the filter stay in the holder until it has cooled
down. The specially designed blendingtube in the
lid of the jug ensure the same taste of coffee in the
whole jug.
8. coffee tastes best immediately after brewing, don't
wait to long with serving the coffee. this way you
can enjoy your cup of coffee to the fullest. place the
glass jug directly after serving the coffee back on the
warming plate or pour the leftover coffee in a thermos
jug.
Attention: This appliance is fitted with an anti-drip
system. this allows you to remove the coffee jug so
that you can pour yourself a cup of coffee while it is still
brewing. Quickly replace the coffee jug to prevent the
filter holder from overflowing. To keep the coffee hot,
replace the glass jug on to the warming plate. It will stay
hot for as long as the coffeemaker is switched on.
always switch off the appliance after use. don't forget
to throw away the paper coffeefilter. Open the lid of
the filter and remove the filterholder. When you use a
permanent filter, empty this, rinse it and you can use it
again.
this appliance has an automatic switch-off which turns
the appliance of after approx. 2 hours if the appliance
was not switched off with the on­/ off switch.
14

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis