SUNDAY Bbq Tyne Crystal Montageanleitung Seite 12

ASSEMBLY, USE AND MAINTENANCE
Dear customer,
Thank you for choosing the Barbecue SUNDAY®: a high quality product that, when assembled and used according
to the instructions contained in this manual, remains resistant to strains caused by fi re and weather conditions over
a long period of time.
Enjoy your barbecue and... bon appetit!
A) ASSEMBLY INSTRUCTIONS
The barbecue is a product that is to be used exclusively outdoors and should not be assembled indoors, it should
also be positioned far from trees, plants and other infl ammable material.
Materials required for assembly: SUNDAY® BETONFAST® high elasticity glue for built-in barbecues or another
high elasticity glue for built-in barbecues. Glues must have a minimum temperature resistance of 200 °C. We re-
commend that you use BETONFAST® glue as it guarantees the highest level of performance and safety in compari-
son with other products on the market. It also allows you to dismantle the components if necessary.
Read the warnings shown on the glue packaging carefully before use.
It is absolutely prohibited to use any type of glue other than those indicated above. These include, for
example, high resistance and quick hardening cements (white cement, aluminous cements, refractory ce-
ments or tile glue). This is because these types of glue do not allow thermal expansion of the elements, producing
a tension that may cause components to crack or in some cases break.
It is also forbidden to use silicone adhesives as they do not seal this type of material.
1. Check that the correct number of components is included and that they are in tact. If any components are mis-
sing or faulty do not use the product. Request a replacement component before beginning to assemble the
product.
2. You MUST position the barbecue on a cement support base that is able to support the weight of the barbecue.
The base must be perfectly level withcompletely fl at surfaces. If the product is to be fi tted on a terrace or similar
structure it is essential that you check the fl oor capacity with a specialist prior to installation.
The bbq must not be cemented/glued to the base/fl oor so that it can expand as the heat increases.
If the product is assembled near to a building, do not position or glue the barbecue onto walls. This is to allow
components to expand during use. A distance of at least 10cm must also be maintained between the work surfa-
ce and walls to allow proper ventilation.
3. Before starting any operations, it is recommended to wear protective gloves and shoes with protection.
4. PAY ATTENTION when removing the packaging straps as components may fall and cause damage to per-
sons and objects.
5. Glue the components to each other to secure them and make them completely stable, following the numbering
shown in the diagram. Do not exceed the amount of glue indicated. This is to avoid creating areas that are too
resistant to expansion, particularly in the area of the combustion chamber. A strip of glue between two adjoining
surfaces is suffi cient.
Only two parts of the fl ue pipe may overlap. This prevents excessive weight from being placed on the
hood. Follow the numeric sequence, measurements, tolerances and times indicated. If the combustion
chamber is composed of three parts, check that they are at the correct distance by inserting a cooking grille as a
test.
6. The elements that form the barbecue's base, hood, fl ue and chimney pot must be painted to protect them from
atmospheric agents and to prevent the components from breaking, (special SUNDAY® paints are recommen-
ded). You are advised to apply the fi rst coat with brush, diluting the paint with 5% water. You can apply the
second coat using a paint diluted by 10%. Use the roll to achieve a "textured" fi nish. You may hoose to shave
off the outer surfaces with a thin layer of semi-liquid mortar before painting to cover any roughness.
7. The accessories (depending on the versions: refractory shelves, EASY FIRE®, grilles, ash drawers, etc.)
are never glued.
8. Once all of the operations have been completed, wait at least 24 hours before inserting the accessories
and using the barbecue.
NOTE: some effl orescence (white stains) can sometimes appear as calcium hydroxide moves to the surface and
combines with carbon dioxide in the atmosphere. These natural blemishes can be simply washed off using water
and a soft brush. It may be necessary to perform this operation several times.
Colour shades may vary due to the natural colouration of materials used. Therefore, differences in colour shades
between components/ products made from the same material do not constitute grounds for complaint.
12
EN