Camera Configuration - Velleman CAMTVI3 Bedienungsanleitung

6. Connection
1. Connect the power terminal of the camera to a 12 VDC regulated
power supply.
2. Connect the video output of the camera to the video input of your DVR
using a 75 Ω coaxial cable.
Remarks:
 Only use a regulated 12 VDC power adapter. Using any other type will
damage this camera.
 Protect the connectors against moisture by applying some insulating
tape over the connectors.

7. Camera Configuration

This camera has its own configuration menu. Either of the two methods
below allows access the menu.
7.1 Method 1
1. On the DVR live view, click the camera's channel to display it in full
screen.
2. Open the control panel by clicking the camera and the panel icons.
3. The control panel appears.
7.2 Method 2
1. On the DVR live view, right-click in the screen to display the DVR
menu.
V. 01 – 12/02/2015
CAMTVI3
5 ©Velleman nv