Starting The Programme; Loading Door Lock; Changing The Selections After Programme Has Started - Beko WMY 111444 LB1 Bedienungsanleitung

1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.
4 Press Start / Pause button. Time countdown starts. ":" sign in the middle of the end time on the display
starts flashing.
C
Additional laundry may be loaded during the End Time countdown period. At the end of the countdown, End Time indicator
turns off, washing cycle starts and the time of the selected programme appears on the display.
When the End Time selection is completed, the time appears on the screen consists of end time plus the duration of the
selected programme.

4.3.10 Starting the programme

1 Press Start / Pause button to start the programme.
2 The Start / Pause button which was off before starts to illuminate steadily now, indicating that the
programme has started.
3 Loading door is locked. The door lock symbol appears on the display after the loading door is locked.
4 Programme follow-up indicator lights on the display will show the current programme step.

4.3.11 Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the door in cases when
the water level is unsuitable.
"Door Locked" symbol appears on the display when the loading door is locked.

4.3.12 Changing the selections after programme has started

Adding laundry after the programme has started:
If the water level in the machine is suitable when you press Start / Pause button, loading door symbol will
flash on the display until the loading door is opened and will disappear when the loading door is opened.
If the water level in the machine is not suitable when you press Start / Pause button, the loading door symbol
remain lit on the display.
Switching the machine to pause mode:
Press the Start / Pause button to switch the machine to pause mode. Pause symbol will flash on the display.
Changing the programme selection after programme has started:
The programme change is not allowed when the current programme is running.
You can select the new programme after switching the current programme to pause mode.
C
The selected program starts anew.
Washing Machine / User's Manual
88
C
0
88:88
1888
88
C
0
88:88
1888
88
0 C
88:88
1888
49 / EN