Canceling The Programme; End Of Programme - Beko WTV 7734XS0 Bedienungsanleitung

4.3.16 Canceling the programme

Press and hold On / Off button for 3 seconds.
C
If you press
child lock first. See To deactivate the child lock.
If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading door
since the water level in the product is above the loading door opening, then turn the
Pump+Spin

4.3.17 End of programme

"End" symbol appears on the display when the programme is complete.
C
If you do not press any button for 10 minutes, the product will turn off automatically. Display and all indicators are turned
off.
Completed programme steps will be displayed if you press On / Off button.
Remove your laundry.
Press On / Off button for 3 sec.
Close the tap connected to the product.
Unplug the product.
4.3.18 Your machine features "Standby Mode".
After you switch on your machine with On-Off button, if no program is started or no other procedure is
performed at the selection step or no action is taken within approx. 10 minutes after the selected program
ends, your machine will switch to OFF mode automatically. Display and all indicators are turned off. Selected
programme data will be displayed if you press On / Off button. Before you start the program, check the
accuracy of your selections. If necessary, repeat them. This is not an error.
Washing Machine / User's Manual
On / Off
button when the Child Lock is enabled, the programme will not be cancelled. You should cancel the
programme and discharge the water in the product.
Programme Selection
knob to
49 / EN