Beko WTV 7734XS0 Bedienungsanleitung Seite 45

Rinse Hold
If you are not going to unload your clothes immediately after the programme completes, you can use rinse
hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled
when there is no water in the machine. Press Start / Pause button after this process if you want to drain the
water without spinning your laundry. Programme will resume and completes after draining the water.
If you want to spin the laundry held in water, adjust the spin speed and press Start / Pause button. The
programme resumes. Water is drained, laundry is spun and the programme is completed.
No Spin
Use this function if you do not want your clothes be spun at the end of the programme.
4.3.6 Soiling level selection
Whenever a new programme is selected, the recommended soiling level for the selected programme appears
on the soiling selection indicator.
To change the soiling level, press the Soiling level adjustment button. Soiling selection increases in
increments.
Indicative values for Synthetics programmes (EN)
Synthetics 60
Synthetics 40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that
small differences may occur between the time shown on the display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.
Washing Machine / User's Manual
3 55 0.90
3 50 0.67
Remaining Moisture
Content (%) **
≤ 1000 rpm
141 45
141 45
Remaining Moisture
Content (%) **
> 1000 rpm
40
40
45 / EN