tepro MILWAUKEE Bedienungsanleitung Seite 26

2. Remove the lid from the large grill
chamber (1) by removing the hinge
bolts. Then pull the hinge pins out of
the hinges of the grill chamber.
3. Connect a long support leg (4) and a
wheel support leg (2) to the large grill
chamber using eight M6 x 12mm bolts
(C), eight M18 washers (D) and eight
M6 nuts (A).
4. Stick the hook of storage rack (3)
through the holes in the support legs
as shown.fire bowl.
26
P140206-TEPRO-1049-Milwaukee-Smoker_20140904.indd 8
5. Connect the other two support legs (2,
4) by sticking the hooks of the storage
rack through the holes in the support
legs. Fasten the parts together using
eight M6 x 12mm bolts and eight M6
nuts. Make sure that the wheel is on
the side where you can find the
connection opening with the small grill
chamber.
Note:
Place the assembled grill upright with
the help of another person. While
doing so, make sure not to exert too
much pressure on the legs.
6. Stick wheel axle (5) through the holes
in the wheel support legs.
4/9/14 3:24 PM