Installation; Attachment; Choosing An Appropriate Pa Amplifier - Omnitronic GCTH-815S Bedienungsanleitung

4. INSTALLATION

4.1 Attachment

Before attaching the speaker, make sure that the installation area can hold a minimum point load of 5 times
the speaker's weight.
The device must only be installed at a vibration-free, oscillation-free and fire-resistant location.
Please refer to the instructions under Operating Determinations.
The given minimum mounting depth must be kept to leave free space behind the speaker.
Please note: when using this speaker system in public or industrial areas, a series of safety instructions
have to be followed that this manual can only give in part. The operator must therefore inform himself on the
current safety instructions and consider them.
Procedure:
Step 1: Cut the ceiling tile to the correct dimensions.
Step 2: Make the electrical connection (section 4.3).
Step 3: Place the speaker onto the ceiling grid with the support rail crossbar.
Step 4: Drop in the ceiling tile.

4.2 Choosing an appropriate PA amplifier

This speaker must only be connected with an appropriate PA amplifier. Observe the correct power matching.
The total load presented to the amplifier must not exceed the rated output of the amplifier.
Before starting with the installation, you must clarify how many speakers you would like to install in the room.
10/12 00040359.DOC, Version 1.0