Safety Precautions - Ferm LMM1004 Gebrauchsanweisung

CE KONFORMITETSERKLÆRING (DK)
Vi erklærer at under almindeligt ansvar, at dette produkt er i overenstemmelse med følgende
normer eller normative dokumenter:
EN60335-1, EN60335-2-77, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
i overensstemmelse med bestemmelserne i direktiverne:
98/37/EEC, 73/23/EEC, 89/336/EEC, 2000/14/EEC
fra 01-12-2005
ZWOLLE NL
W. Kamphof
Quality department
Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor til
enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland
DK
76

2. SAFETY PRECAUTIONS

Explanation of symbols
In this operator's guide the following symbols are used:
CE Conforms with the relevant European safety standards.
Risk of injury or damage in the event of failure to comply with the instructions in this
User's Manual.
Read the instructions.
Always switch off the machine, remove the plug from the socket and wait until the
cutter blade has stopped turning before cleaning the machine or carrying out
maintenance or repairs.
Always wear safety glasses, hearing protection, safety shoes and heavy-duty work
clothing!
Do not use the machine in wet weather.
The rotating cutter blade will not stop immediately the machine is switched off.
Keep your body clear of sharp parts.
Remove the plug from the socket immediately if the plug or power cord are
damaged.
Keep at a safe distance.
Defective and/or scrapped electrical or electronic tools should be handed in to a
recognized collection point for reprocessing.
Special safety precautions
Warning! When using electric equipment due heed must always be paid to the local prevailing
safety precautions so as to minimize the risk of electric shock, injury or fire. Read the following
safety instructions and the enclosed safety precautions thoroughly before using the machine,
and save them for future reference!
• Make sure that the machine is assembled correctly before using it.
• Never move the machine by pulling on the plug.
• Always remove the plug from the socket before picking up the machine.
• Always switch off the machine before removing the plug from the socket.
Ferm Ferm
GB
05