Troubleshooting - Esscom BUTLER E451 Bedienungsanleitung

Main Menu
1
2
3
4
5
6
7
8
9
You are not obliged to play the main menu before activating any function.
Outgoing Message Menu
Press '8' in the main menu. The unit shall announce 'Outgoing message menu' followed by the
outgoing message menu:
2
3
4
5
6
8
1
Setting the security code
4 5 6
GHI JKL MNO
#
1

10 Troubleshooting

Symptom
No display
No tone
Press '1' to hear the main menu.
Press '2' to play all messages.
Press '3' to play new messages.
Press '4' to skip back during messages.
Press '5' to delete during messages.
Press '6' to skip forward during messages.
Press '7' to set answer on/off.
Press '8' to hear outgoing messages menu.
Press '9' to set a new security code.
Press '2' to play the outgoing message.
Press '3' to record 'outgoing message 1'.
Press '4' to record 'outgoing message 2'.
Press '5' to select 'outgoing message 1'.
Press '6' to select 'outgoing message 2'.
Press '8' to hear outgoing messages menu again.
Press '1' to hear mean menu again.
5 The unit shall ask to press the ' ' key to set a new VIP code. Press ' '.
6 Use the numerical keypad to enter the new security code after the tone.
7 Press the ' ' key to confirm.
#
8 The unit shall ask to press '1' for main menu.
Possible cause
Batteries uncharged
Handset turned off
Telephone cord badly connected Check the telephone cord
The line is occupied by another
handset
Troubleshooting
Solution
Check the position of the
batteries
Recharge the batteries
Turn on the handset
connection
Wait until the other handset
hangs up
25