Daily Use; Helpful Hints And Tips - ZANKER KEV6340XXK Benutzerinformation

Residual heat indicator

Daily use

Activation and deactivation
Touch for 1 second to activate or deactivate the ap-
pliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you activate the
appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth,
etc.). Remove the object or clean the control panel.
• You do not deactivate a cooking zone or change the
heat setting. After some time
appliance deactivates. See below.
• The relation between heat setting and times of the
Automatic Switch Off function:
•
- — 6 hours
•
- — 5 hours
•
— 4 hours
•
- — 1.5 hours
The heat setting
Touch to increase the heat setting. Touch
crease the heat setting. The display shows the heat
setting. Touch and
vate the cooking zone.

Helpful hints and tips

Cookware
Information about the cookware
• The bottom of the cookware must be as thick and flat
as possible.
• Cookware made of enamelled steel and with alumini-
um or copper bottoms can cause the colour change
on the glass-ceramic surface.
Energy saving
16
).
comes on and the
to de-
at the same time to deacti-
Warning! The risk of burns from residual
heat!
The Child Safety Device
This function prevents an accidental operation of the
appliance.
To activate The Child Safety Device
• Activate the appliance with
settings.
• Touch
of the two front cooking zones for 4 sec-
onds. The symbol
• Deactivate the appliance with
To deactivate The Child Safety Device
• Activate the appliance with
settings. Touch
for 4 seconds. The symbol
• Deactivate the appliance with
To override The Child Safety Device for only one
cooking time
• Activate the appliance with
comes on.
• Touch
of the two front cooking zones for 4 sec-
onds. Set the heat setting in 10 seconds. You can
operate the appliance.
• When you deactivate the appliance with
Child Safety Device operates again.
How to save energy
• If it is possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start it.
• Stop the cooking zones before the end of the cook-
ing time to use residual heat.
• The bottom of pans and cooking zones must have
the same dimension.
The Examples of cooking applications
The data in the table is for guidance only.
. Do not set the heat
comes on.
.
. Do not set the heat
of the two front cooking zones
comes on.
.
. The symbol
, The