Settings; Function Settings - Pioneer MVH-270DAB Bedienungsanleitung

Settings

You can adjust various settings in the main menu.
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select one of the categories below, then press to confirm.
• FUNCTION settings (page 9)
• AUDIO settings (page 10)
• SYSTEM settings (page 10)
• ILLUMINATION settings (page 11)
3
Turn the M.C. dial to select the options, then press to confirm.

FUNCTION settings

The menu items vary according to the source.
Menu Item
S.FOLLOW
[ON], [OFF]
FM SETTING
[TALK], [STANDARD], [MUSIC]
BSM
REGIONAL
[ON], [OFF]
Description
Search for another ensemble that supports the
same service component with better reception.
If no alternative service component can be found
or reception remains poor, the unit will
automatically switch to an identical FM
broadcast.
Match the sound quality level with the broadcast
signal conditions of the FM band signal.
(Available only when FM band is selected.)
Store the six strongest stations on the number
buttons (1/ to 6/ ) automatically.
Limit the reception to the specific regional
programs when AF (alternative frequencies
search) is selected. (Available only when FM
band is selected.)
Menu Item
LOCAL
FM: [OFF], [LV1], [LV2], [LV3], [LV4]
MW/LW: [OFF], [LV1], [LV2]
TA
[ON], [OFF]
AF
[ON], [OFF]
NEWS
[ON], [OFF]
SEEK
[MAN], [PCH]
S.RTRV
USB iPod
[1] (effective for low compression
rates),
[2] (effective for high
compression rates),
[OFF]
AUDIO BOOK
iPod
[FASTER], [NORMAL], [SLOWER]
PAUSE
Description
Restrict the tuning station according to the
signal strength.
Receive current traffic information if available.
(Available only when FM band is selected.)
Allow the unit to retune to a different frequency
providing the same station. (Available only when
FM band is selected.)
Interrupt the currently selected source with
news programs. (Available only when FM band is
selected.)
Assign / buttons to seek the stations
one by one (manual tuning) or select a station
from the preset channels.
Enhance compressed audio and restore rich
sound. (Not available when USB is selected as a
source and the MIXTRAX function is set to on.)
Change the playback speed. (Not available when
[CONTROL iPod/CTRL iPod] is selected in the
control mode.)
Pause or resume playback.
9
En