Instructions For Fixing Stand - Seg Hobart Bedienungsanleitung

55 cm (21.5") LED BLU-TV Hobart

Instructions for fixing stand

The parts
needed for installing the stand (supplied)
Installation
(Put your TV on the table with its rear cabinet facing upwards.)
1. Put the stand on the TV set
2. Screw the stand in the positions with the screws supplied (4 x ST4 x 16F).
Instructions for fixing stand
Note: the pictures below are only for reference
Rear cabinet of TV
TV board
TV stand
TV board
Screws(4 x ST4 x 16F)
Rear cabinet of TV
TV stand
Screws:4xST4X16F
5 3