System Schedule (Timer Programming) - Clatronic CTV 722 LCD DVB-T Bedienungsanleitung

Electronic Program Guide (EPG)
Press the EPG button to call up the electronic pro-
gram guide. In order for it to be possible for the EPG
to be activated the channel signal must contain EPG
data.
EPG Timetable
Press the VOL+ button to call up the EPG timetable.
You can now leaf through today's programs. Move the
cursor with the buttons PRO+ or PRO- to the desired
programme information.
Note:
With the EXIT button you can move back to the
previous page.
Programme Details
Press the VOL+ button when the program overview
is displayed in order to call up the programme details.
Depending on the amount of additional informati-
on available, this may be distributed over several
pages. The symbol „ " now appears on the bottom
right-hand side of the display. Press the PRO- button
to move to the next pages. In order to move to the
previous pages please press the PRO+ button (the
symbol „ " appears on the bottom right-hand side of
the display).
To return to the normal television programme please
press the EXIT button three times.
30
05-CTV 722 LCD_GB Neu2 30
Note:
If there is no additional information available on the
programme, no further description is displayed.
EPG Timer Programming
Press the EPG button to call up the electronic
program guide. Press the VOL+ button to call up the
EPG timetable. Move the cursor with buttons PRO+ or
PRO- to the desired programme information.
Press the button LIST/OK to call up the system
schedule. Activate timer programming by pressing the
LIST/OK button.
To return to the normal television programme please
press the EXIT button twice.

7.4 System Schedule (Timer Programming)

Press the MENU button to display the main menu.
Move the cursor with the buttons PRO+ or PRO- to
the submenu „System Setting". Press the LIST/OK
button to call up the system setting menu. Move the
cursor with the buttons PRO+ or PRO- to the subme-
nu „System schedule". Press the LIST/OK button to
call up the system schedule menu.
Press the LIST/OK button to change to the „Detail"
window.
Select the mode with the VOL+ or VOL- buttons.
Move the cursor with the buttons PRO+ or PRO- to
the submenu „Start date". Now enter the correct date
(year/month/day) with the number buttons on the
remote control.
20.02.2006, 9:58:41 Uhr