Herunterladen Inhalt Inhalt Diese Seite drucken

Operation Of The Menu; Automatic Installation Of The Dvb-T Television Receiver - Clatronic CTV 722 LCD DVB-T Bedienungsanleitung

Lcd-tv mit dvb-t-receiver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7. Operation of the Menu

7.1 Automatic Installation of the
DVB-T Television Receiver
Initial Installation
The system automatically starts initial installation
when the television set is switched on. Please carry
out the installation as shown in the illustration.
It is possible that in the following operating modes the
system does not start the initial installation:
The initial installation has already been perfor-
med. (The channel overview is not empty.)
Note:
If you would like to start the initial installation again,
please proceed as follows.
1. Delete all channels in the channel overview.
2. Reset the television set to the factory setting in the
system confi guration.
Move the cursor with the VOL+ / VOL- buttons over
the words YES or NO. Press the LIST/OK button to
confi rm.
YES: Start of initial installation
NO:
Do not perform initial installation
Country Selection / Language / Time Zone
Select the country according to the local television
standard with the buttons VOL+ or VOL-. Navigate
the cursor with the PRO+ or PRO- buttons on the
remote control to the next selection.
05-CTV 722 LCD_GB Neu2 27
Select the menu language with the buttons VOL+
or VOL-. Move the cursor with the buttons PRO+ or
PRO- to the next selection.
Set the local time zone with the buttons VOL+ or
VOL-. Move the cursor with the buttons PRO+ or
PRO- to the next selection.
Navigate the cursor with the buttons VOL+ or VOL- to
the word BACK or NEXT. Press the LIST/OK button
to confi rm.
BACK: Move to the previous menu page.
NEXT: Move to the next menu page.
Starting Automatic Search
1st step
Move the cursor with the buttons VOL+ or VOL- to
the word YES or NO. Press the LIST/OK button to
confi rm.
BACK: Move to the previous menu page.
YES: Delete the program list and start the automatic
search.
NO:
Stop the automatic search and return to the
main menu.
2nd step
The automatic channel search starts and scans the
frequency band for channels that can be received in
your region. The channels that are found are listed in
the TV/music list.
27
20.02.2006, 9:58:36 Uhr

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis