Herunterladen Inhalt Inhalt Diese Seite drucken

Before Installation; Scope Of Delivery; Assemble Device - AEG CTV 2404 LED-DVB-T Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CAUTION:
• Do not use odd battery types or fresh and exhausted batteries.
• Do not dispose of batteries with the household trash. Return exhausted batteries to collection points or your dealer.
NOTE:
• If the remote control range shortens the batteries are exhausted and must be replaced.
• Do not use rechargeable batteries.
• Protect batteries from heat and direct sunlight. Do not dispose of batteries by burning, danger of explosion!
• Remove exhausted batteries from the device. Remove the batteries during longer periods of non-use to avoid bat-
tery leakage.
• Wash thoroughly after coming into contact with battery acid.

4. Before Installation

4.1 Scope of Delivery

After unpacking ensure that the following parts were included:
• TV set
• Stand base plate and three Phillips screws
• Power supply (DC 12V)
• Remote control (incl. 2 x 1.5 V batteries type LR03 AAA)
• User manual
• Scart adapter cable

4.2 Assemble Device

• Mount the base plate onto the stand. Manually secure the screw to the base.
• Attach the stand with the three Phillips screws.
• Remove the protective film from remote control and TV set, if attached.
• Place the TV set on a stable, level surface. Ensure that the surface can carry the TV's weight.
• Protect the device from extreme heat and humidity.
• Ensure sufficient ventilation on all sides. When placed in a wall unit leave at least 20 cm on top and 10 cm distance at
the sides for ventilation.
NOTE: Wall mounting
• You can alternatively mount the device with the help of a suitable VESA standard wall bracket (available from dea-
lers) to a suitable wall.
- Gap between holes in millimeters: 100 x 100.
- Thread: M4. The pitch length of the screws may not exceed 10 mm.
• The stand is not fitted when mounting to a wall.
• Maintain a clearance of at least 8 cm for ventilation around the device.
• Check the reach of the cable! When mounting the device, make sure that an easily accessible outlet is available
within reach of the power cable.
ENGLISH
55

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis