Intenso S4000 Bedienungsanleitung Seite 15

b) Charging devices through the Powerbank
 This Powerbank has a USB entry (output max. 2.1A) and an integrated
USB cable with micro-USB plug (output max. 2A).
 There are two possibilities to charge a device through Powerbank:
Possibility 1: Connect the micro-USB connection of the integrated cable
with the micro-USB entry of the device to be charged. The charging
process will start automatically.
Possibility 2: Connect the supplied USB-cable with the USB A entry of
Powerbank and the other ending of the USB cable with the micro-USB
entry of the device to be charged. Within 4 hours approx. the charging
process will start automatically. If you want to connect after, press the
function key to start the charging process manually.
 If you first connect the device to be charged and then Powerbank with
the USB-cable, Powerbank will always start automatically.
 With Powerbank you can charge two devices contemporaneously, for ex.
a table at the USB A entry and a smartphone by the integrated cable with
the micro-USB plug.
 Of course, you can also use your own USB charging cable to connect the
Powerbank with your device. Please note, however, that devices can be
charged only through the USB A port of the Powerbank.
 If a device is charged with the Powerbank and the Powerbank has almost
reached its capacity limits, this is signalled by flashing of the last status
LED. Please charge the Powerbank again.
 Please note that, when charging a device with a Powerbank nearly 30% of
total capacity is consumed by the charging process alone. This is caused
for example by the loss of power from circuit heat and voltage
conversion.
 For optimal performance, the Powerbank must be used regularly. If this is
not the case, fully charge the Powerbank at least every three months.
Page 6 of 8 EN