Sharp PN-G655E Bedienungsanleitung Seite 38

Specifications
Power management
This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in
order for the monitor's power management function to work.
DPMS: Display Power Management Signaling
DPMS Screen
ON STATE Display
STANDBY
No
SUSPEND
display
OFF STATE
DDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
PC1/AV1 input terminal pins
(DVI-D24 pin)
No. Function
1 TMDS data 2-
2 TMDS data 2+
3 TMDS data 2/4 shield
4 N.C.
5 N.C.
6 DDC clock
7 DDC data
8 N.C.
9 TMDS data 1-
10 TMDS data 1+
11 TMDS data 1/3 shield
12 N.C.
RS-232C input terminal pins
(D-sub 9 pin)
No. Function
1 N.C.
2 Transmitted data
3 Received data
4 N.C.
5 GND
RS-232C output terminal pins
(D-sub 9 pin)
No. Function
1 N.C.
2 Received data
3 Transmitted data
4 N.C.
5 GND
36
E
Power
Hsync Vsync
consumption
550 W Yes Yes
No Yes
10 W
Yes No
No No
No. Function
13 N.C.
14 +5 V
15 GND
16 Hot-plug detection
17 TMDS data 0-
18 TMDS data 0+
19 TMDS data 0/5 shield
20 N.C.
21 N.C.
22 TMDS clock shield
23 TMDS clock+
24 TMDS clock-
No. Function
6 N.C.
7 N.C.
8 N.C.
9 N.C.
No. Function
6 N.C.
7 N.C.
8 N.C.
9 N.C.
DMPM: Digital Monitor Power Management
DMPM Screen
Monitor ON Display
Active OFF No display
PC2 input terminal pins
(Mini D-sub 15 pin)
No. Function
1 Red video signal input
2 Green video signal input
3 Blue video signal input
4 N.C.
5 GND
6 GND for red video signal
7 GND for green video signal
8 GND for blue video signal
PC/AV output terminal pins
(DVI-D24 pin)
No. Function
1 TMDS data 2-
2 TMDS data 2+
3 TMDS data 2/4 shield
4 N.C.
5 N.C.
6 DDC clock
7 DDC data
8 N.C.
9 TMDS data 1-
10 TMDS data 1+
11 TMDS data 1/3 shield
12 N.C.
Power
consumption
550 W
10 W
No. Function
9 +5 V
10 GND
11 N.C.
12 DDC data
13 Hsync signal input
14 Vsync signal input
15 DDC clock
No. Function
13 N.C.
14 +5 V
15 GND
16 Hot-plug detection
17 TMDS data 0-
18 TMDS data 0+
19 TMDS data 0/5 shield
20 N.C.
21 N.C.
22 TMDS clock shield
23 TMDS clock+
24 TMDS clock-