Installing The Remote Control - Philips 15HF8442 Handbuch

Make sure that air can circulate freely through the ventilation slots
Connecting the Mains
Insert the mains plug into the wall socket and switch on. Please refer to the label on the back of the
television for the correct operating voltage.

Installing the remote control

Switch the TV on:
Press the power switch
comes on. If the TV is in standby mode (red indicator), press the - TV+ keys or the
remote control.
Accessing the Set-up Menu
When the set is in the High Security Mode, the Setup menu can be accessed only with an Institutional
Set-up Remote Control (RG4172BK or RC2573).
When the set is in the Standard Security Mode, the Set-up Menu may be accessed either with an
Institutional Set-up Remote Control, or with a guest remote control (like the RC2886) using an
authorized access code.
on the TV. An indicator on the front of the TV lights up and the screen
- 4 -
To prevent any unsafe situations, no naked flame
sources, such as lighted candles, should be placed
on or in the vicinity. Avoid heat, direct sunlight and
exposure to rain or water. The equipment shall not
be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on
it. Insert the aerial plug firmly into the aerial socket
at the bottom of the TV.
•
Remove the cover at the back of the
remote control.
•
Insert the correct type and size batteries
into the compartment making sure they
are the right way around.
•
You can secure your batteries by
fastening an appropriate screw into the
hole of the battery cover.
key on the