Medion LIFE P12291 Bedienungsanleitung Seite 125

40
Set the frequency. The default setting is
FRE-
AUTO.
QUENCY
Only active if the option NETWORK
(only in
SCAN has been selected in search mode.
DVB-C
mode)
Set the symbol rate.
SYMBOL
RATE
(only in
DVB-C
mode)
Logical Channel Numbering: Select the
SORTING
setting ON if you want to order the chan-
BY LCN
nels based on a preset channel list (if
available from the channel supplier).
After you have made all the settings, press OK. The
channel search will then start.
If you have selected the source SATELLITE, the follow-
ing setting options are available:
COUNTRY Select the desired country for the chan-
nel search.
SATELLITE Select the satellite via which the search
will be started.
Set the search mode.
SCAN
DEFAULT: A search on the selected sat-
MODE
ellite will be carried out based on the tran-
sponder list saved for this satellite. This re-
quires a little time.
NETWORK SCAN: Activate/deacti-
vate the network search.
BLIND SCAN: A complete search on
the selected satellite will be carried out.
This will also take into account new tran-
sponders that have not been added to
the list of transponders. Two searches are
carried out with the blind scan. The first
search identifies the transponders for the
satellite, while the second search locates
the channels. The blind search requires
the most time.