Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 23

Loading the Dishwasher

Before placing the dishes in the dishwasher, remove the larger
food particles to prevent the filter from becoming clogged,
which results in reduced performance.
If the pots and pans have baked-on food that is extremely
hard to remove, we recommend that they be allowed to
soak before they are washed. This will eliminate the need
for extra wash cycles.
Pull out the racks to facilitate loading the dishwasher.
How to Use the Lower Rack
We recommend that you place the most difficult to clean
items on the bottom rack: pots, pans, lids, serving dishes
and bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the sides of
the racks in order to avoid blocking the rotation of the top
spray arm.
- Pots, serving bowls, etc. must always be placed top down.
- Deep pots should be slanted to allow the water to flow out.
The lower rack has tip-up sectors (see figure B), so you can
place even more saucepans and frying pans or make room
for the larger one
Place the cutlery with the handles at the bottom; if the basket
is the one with side inserts, then insert the tea spoons one by
one into the slots (see figure A).
This basket is equipped with one removable grid: insert the
cutlery one by one into the slots, with the handles at the
bottom.
Knives and utensils with sharp blades or tips should be
positioned with the sharp parts at the bottom. Position all
cutlery items so that they don't touch.
It is best if you place longer utensils horizontally at the front
of the upper rack. It is best if you place longer utensils
horizontally at the front of the upper rack.
How to Use the Upper Rack
Place delicate and lightweight dishes in the upper rack:
glasses, tea cups and coffee cups, saucers - but plates too -
shallow salad bowls, slightly dirty frying pans and shallow
pans.
Position light weight dishes in such a way as to avoid their
being moved by the spray of water.
The appliance can also be equipped with one or two tip-up
compartments onto which you can place mugs and cups, as
well as long sharp knives and serving cutlery.
After loading the dishes, remember to check that the blades
on the sprayer arms can turn freely without hitting against
any dishes.
How to adjust the Upper rack
The top rack can be adjusted using the two rack heights (top
and bottom).
.
B
The upper rack can be adjusted for height by using the
knobs located on the sides of the rack itself (see figure C)
15
Load examples
Bottom Rack
fig. A
Top Rack
fig. C
GB

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis