Specifications - ZENEC ZE-MC172 Betriebsanleitung

SPECIFICATIONS

CEA power ratings
Main amplifier
Power output: 20 Watts RMS X 4 channels into 4 Ohms @ < 10% THD+N
Signal to noise ratio: 70dBA below reference. (Reference: 1 Watt, 4 Ohms)
MAX power: 35 X 4 Watts into 4 Ohms, all channels driven
Frequency response: 20Hz to 20kHz, -3dB. Aux input used as source reference
Reference supply voltage: 14.4VDC
DVD/CD player
Compatible formats: DVD-R, DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3,
WMA, HDCD, SVCD, VCD, MPEG, JPEG, MP3/WMA files burned onto a DVD+R/W or
DVD-R/W and CD-R/RW
Signal to noise ratio: 85dBA
Dynamic range: >95dB
Frequency response: 20Hz to 20kHz, -3dB
Channel separation: > 60dB @ 1kHz
D/A converter(s): 5-channel high performance 24-bit, 192kHz, multi-bit Delta Sigma
modulation. DAC supports sample rates from 8~192kHz.
Electronic skip protection (ESP):
DVD: 2-3 sec, CD-DA: 10 sec, MP3: 100 sec, WMA: 200 sec
(ESP time is approximate)
Mechanical anti vibration ability: 10~200Hz, X/Y/Z direction: 1.0G
Video section
Format: NTSC, PAL (auto-detection)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)
FM tuner section
Tuning range: 87.5MHz – 107.9MHz
Mono sensitivity (–30dB): 10dBu
Quieting sensitivity (–50dB): 15dBu
Alternate channel selectivity: 70dB
Signal to noise ratio @ 1kHz: 58dB
Image rejection: 60dB
Stereo separation @ 1kHz: 30dB
Frequency response: 30Hz – 15kHz, –3dB
95 95
ENGLISH ENGLISH