Indesit W 63 X Bedienungsanleitungen Seite 20

Here I'm in command
Making the right choice is important. And it's easy.
Programme selector knob
Use this dial to select one of the
15 wash programmes available for
all your laundry requirements (see
programme table on page 18).
Remember that this dial should
be turned in a clockwise
direction and only when the
machine is off.
Temperature control knob
It is used to set the wash tempe-
rature in the recommended
programme table on pag. 18. It
also allows you to reduce the tem-
perature recommended for the
selected programme, and even to
set a cold wash cycle ( ).
Detergent dispenser
It is divided into three
compartments:
1. Detergent for pre-wash;
2. Detergent for the main cycle
wash;
3. Fabric conditioner.
The detergent dispenser is here.
Instructions for installation and use
17
C
Anti-crease
This button allows you to
interrupt the programme (on
symbol ), keeping the washing
soaking in water before the spin
cycle. It is a very useful button,
because it prevents delicate
and synthetic fabrics from
creasing (for example, when
you cannot take the washing out
at the end of the wash cycle but
only after a few hours).
It can only be used in
programmes for synthetic
fabrics and for wool.
ATTENTION! Before opening
the door, you must drain the
water by setting knob A to
symbol . If, on the other hand,
you prefer to carry on with the
spin cycle, just press button D
again.
Spin Exclusion
Use this button to exclude the
spin cycle. This function should
be used for items that are
difficult to iron.
3
2
1
Understanding the control panel
E
D G
F
On-off
When button F is pressed, the
washing machine is switched
on, when it is not the machine
is switched off.
The on-off lamp
When this is lit, the machine is
on.
A
B