Samsung HT-F4200 Bedienungsanleitung Seite 19

 Level: Lets you adjust the relative
loudness of each speaker from 6db
to -6db. For example, if you like
deep bass, you can increase the
loudness of the subwoofer by 6db.
 Distance: Lets you adjust the
relative distance of each speaker
from the listening position up to 30
feet. The farther the distance, the
louder the speaker will be.
 Test Tone: Lets you run the test
tone function so you can test your
adjustments. Setting Test Tone to
On turns the Test Tone on. Setting
it to Off turns it off.
Lets you select which speakers you
Speaker
want active, either the TV's speakers
Selection
or the home cinema's speakers.
Lets you direct the sound from the
TV to the Home Cinema speakers.
Requires a HDMI connection and
an Audio Return Channel (ARC)
compatible TV.
• When Audio Return Channel set
Audio Return
to on, use HDMI Cable to connect
Channel
the product to the TV. At this time,
optical input does not work.
• When Audio Return Channel
set to auto, use HDMI Cable to
connect the product to the TV. At
this time, ARC and optical input is
selected automatically.
Lets you set the Digital Output to
match the capabilities of the AV
receiver you've connected to the
Digital Output
product. For more details, please
refer to the digital output selection
table. (See page 32)
Lets you apply dynamic range
control to Dolby Digital, Dolby Digital
Plus, and Dolby TrueHD audio.
 Auto: Automatically controls the
dynamic range of Dolby TrueHD
audio, based on information in the
Dolby TrueHD soundtrack. Also
turns dynamic range control off for
Dynamic
Dolby Digital and Dolby Digital Plus.
Range Control
 Off: Leaves the dynamic range
uncompressed, letting you hear the
original sound.
 On: Turns dynamic range control on
for all three Dolby formats. Quieter
sounds are made louder and the
volume of loud sounds is reduced.
When the product is attached to a
digital TV, lets you adjust the audio
Audio Sync delay so that the audio syncs with
the video. You can set the delay
between 0 and 300 milliseconds.
Lets you select the multi-channel
downmix method that is compatible
Downmixing with your stereo system. You
Mode can choose to have the product
downmix to normal stereo or to
surround compatible stereo.
Network
For more information about Network
Wired
Settings and network functions, see
Network
"Networks and the Internet" starting
Settings
on page 20.
Lets you test the Internet Protocol
Network Test
setup to see if it is working correctly.
Lets you check whether a
Network
connection to the network and the
Status
Internet have been established.
BD-Live
Lets you allow or prohibit an Internet
Internet
connection for the BD-Live service.
Connection
System
Lets you re-run the Initial Settings
Initial Settings
procedure. See page 16 for details.
Anynet+ is a convenient function
that offers linked operations with
other Samsung products that have
the Anynet+ feature and lets you
Anynet+
control those products with one
(HDMI-CEC)
Samsung TV remote. To operate
this function, you must connect this
product to an Anynet+ Samsung TV
using a HDMI cable.
Lets you manage the contents you
downloaded through a Blu-ray disc
that supports the BD-Live service.
You can view the information about
BD Data
the USB device you are using for
Management
BD Live data storage including
the storage space. You can also
delete BD Live data and change the
device.
19
|
English