Herunterladen Inhalt Inhalt Diese Seite drucken
LRP S10 BLAST BX Gebrauchsanweisung
Vorschau ausblenden Andere Handbücher für S10 BLAST BX:

Werbung

M A N U A L
G E B R A U C H S A N W E I S U N G

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für LRP S10 BLAST BX

  • Seite 1 M A N U A L G E B R A U C H S A N W E I S U N G...
  • Seite 2: Akku Einbauen

    SCHNELLSTART-ANLEITUNG QUICKSTARTGUIDE 27MHZ AKKU LADEN CHARGING BATTERY Verbinden Sie den Fahrakku mit dem mitgelieferten Ladegerät und schließen das Ladegerät dann an eine 230V Steckdose an. Die Ladedauer des vollständig entleerten Akkus beträgt ca. 5,5 Std. Connect the battery to the included wall-charger and plug the charger into a 230V power-socket. Charging time for complete empty batteries is about 5,5h.
  • Seite 3 Wenn Sie diese Wartungsarbeiten nicht durchführen wird die Leistung nance for best performance. If you don’t do regular maintenance the des Autos darunter leiden. Alle zur Wartung benötigten Teile sind bei LRP perfor mance will suffer. LRP electronic has all the necessary parts and electronic erhältlich.
  • Seite 4: Battery Replacement

    SCHNELLSTART-ANLEITUNG QUICKSTARTGUIDE 27MHZ KURZANLEITUNG FERNSTEUERUNG USER MANUAL TRANSMITTER BATTERIEWECHSEL BATTERY REPLACEMENT Legen Sie acht Batterien mit der richtigen Polarität entsprechend der Markierung in den Akku- schacht (8 AA Batterien) Load the eight batteries in accordance with the polarity marker on the battery tray (8 AA size batteries) Batteriewechsel: 1.
  • Seite 5: Endpunktjustierung

    SCHNELLSTART-ANLEITUNG QUICKSTARTGUIDE 27MHZ GAS-/LENKUNGSTRIMMUNG THROTTLE / STEERING TRIM Mit der Gas-Trimmung stellen sie die Neutralposition ihres Gasservos ein. Beim Setup des Fahrtenreglers sollte die Gas-Trimmung in neutraler (mittlerer) Position eingestellt sein. Thottle Trim is used to set neutral position of the Throttle-/Brake-Servo. When setting up your ESC, thottle trim should always set to neutral (middle) setting. Mit der Lenkungs-Trimmung stellen sie die Neutralposition ihres Lenkservos ein.
  • Seite 6 SCHNELLSTART-ANLEITUNG QUICKSTARTGUIDE 2.4GHZ AKKU LADEN CHARGING BATTERY Verbinden Sie den Fahrakku mit dem mitgelieferten Ladegerät und schließen das Ladegerät dann an eine 230V Steckdose an. Die Ladedauer des vollständig entleerten Akkus beträgt ca. 5,5 Std. Connect the battery to the included wall-charger and plug the charger into a 230V power-socket. Charging time for complete empty batteries is about 5,5h.
  • Seite 7 Wenn Sie diese Wartungsarbeiten nicht durchführen wird die Leistung nance for best performance. If you don’t do regular maintenance the des Autos darunter leiden. Alle zur Wartung benötigten Teile sind bei LRP perfor mance will suffer. LRP electronic has all the necessary parts and electronic erhältlich.
  • Seite 8 SCHNELLSTART-ANLEITUNG QUICKSTARTGUIDE 2.4GHZ KURZANLEITUNG FERNSTEUERUNG USER MANUAL TRANSMITTER BATTERIEWECHSEL BATTERY REPLACEMENT Legen Sie acht Batterien mit der richtigen Polarität entsprechend der Markierung in den Akku- schacht (8 AA Batterien) Load the eight batteries in accordance with the polarity marker on the battery tray (8 AA size batteries) Batteriewechsel: 1.
  • Seite 9 SCHNELLSTART-ANLEITUNG QUICKSTARTGUIDE 2.4GHZ GAS-/LENKUNGSTRIMMUNG THROTTLE / STEERING TRIM Mit der Gas-Trimmung stellen sie die Neutralposition ihres Gasservos ein. Beim Setup des Fahrtenreglers sollte die Gas-Trimmung in neutraler (mittlerer) Position eingestellt sein. Thottle Trim is used to set neutral position of the Throttle-/Brake-Servo. When setting up your ESC, thottle trim should always set to neutral (middle) setting. Mit der Lenkungs-Trimmung stellen sie die Neutralposition ihres Lenkservos ein.
  • Seite 10: Explosionszeichnung

    EXPLOSIONSZEICHNUNG EXPLODED VIEW 120924 120960 120941 120919 120913 120934 120995 120927 120901 120913 120940 120924 65130 120960 120939 132720 120916 122006 120931 120931 120916 120904 122004 120946 120938 120903 120915 120917 12091 120943 120901 120900 120905 120903 120907 120963 120911 120925 120909 120922...
  • Seite 11 120927 120944 120927 120906 120918 122007 120927 120923 120926 120903 120918 122005 120937 120915 120929 120925 120942 120910 122003 120909 120930 120931 120908 120933 120935 120914 120963 120931 120960 120936 120912 122002 120912 120963 120960 P . 11...
  • Seite 12: Parts List

    TEILELISTE PARTS LIST 120900 120901 120902 120903 Differentialsatz komplett (1 Stk.) - S10 Kegelrad 13Z. (2Stk.) - S10 Differentialausgänge v+h Diff. - S10 Getriebegehäuse (1Stk.) - S10 Complete Differential Set (1 pc.) - S10 Diff Pinion Gear 13T (2pcs) - S10 Differential Outdrives front+rear - S10 Gear Box (1pcs) - S10 120904...
  • Seite 13 TEILELISTE PARTS LIST 120922 120923 120924 120925 Slipper komplett mit Hauptzahnrad 68Z - S10 Stabilisator-Satz vorne - S10 BX Stabilisator-Satz hinten - S10 BX Slipper Clutch complete with Achsstift 3x30mm (4 Stk.) - S10 Front Sway Bar Set - S10 BX Rear Sway Bar Set - S10 BX Main Gear 68T - S10 3x30mm Hinge Pin (4pcs) - S10...
  • Seite 14 TEILELISTE PARTS LIST 120964 120965 120946 122004 M3 Stoppmutter schwarz (10Stk.) - S10 M2.5 Stoppmutter schwarz (10Stk.) - S10 Servo Horn Plastik (4Stk.) - S10 Speichen Felge VA weiss (2 Stk.) - S10 BX M3 Lock Nut black (10pcs.) - S10 M2.5 Lock Nut black (10pcs.) - S10 Servo Arm Plastic (4pcs) - S10 Spoke Wheel front white (2 pcs) - S10 BX...
  • Seite 15 Dämpferbefestigungsspacer (10 Stk.) - S10 Upper Shock Mounting Spacer Radmitnehmerstifte (10Stk.) - S10 Dekorbogen S10 Blast BX - 1/10 Buggy (10 Stk.) - S10 Wheel Adapter Pins (10pcs) - S10 Decalsheet S10 Blast BX - 1/10 Buggy LRP Servo R-7020, 3kg...
  • Seite 16 EXPLOSIONSZEICHNUNG EXPLODED VIEW 120960 120924 120919 120992 120913 120934 120995 120940 120963 120913 120924 120960 122009 1209 120916 132720 120987 120963 120942 120916 120904 120946 120987 120916 120943 120996 120963 120982 12091 120922 120915 120905 120901 120980 120911 120925 120900 120922 120962 120996...
  • Seite 17 122010 120997 120982 120906 120923 120926 120997 120926 120986 120915 120925 120915 120923 120929 120942 122008 120984 120909 120981 0931 120935 120914 120910 120963 120960 120931 120985 120912 122008 120983 120963 120960 P . 17...
  • Seite 18 TEILELISTE PARTS LIST 120900 120901 120902 120903 Differentialsatz komplett (1 Stk.) - S10 Kegelrad 13Z. (2Stk.) - S10 Differentialausgänge v+h Diff. - S10 Getriebegehäuse (1Stk.) - S10 Complete Differential Set (1 pc.) - S10 Diff Pinion Gear 13T (2pcs) - S10 Differential Outdrives front+rear - S10 Gear Box (1pcs) - S10 120904...
  • Seite 19 TEILELISTE PARTS LIST 120922 120923 120924 120925 Slipper komplett mit Hauptzahnrad 68Z - S10 Stabilisator-Satz vorne - S10 Stabilisator-Satz hinten - S10 Slipper Clutch complete with Achsstift 3x30mm (4 Stk.) - S10 Front Sway Bar Set - S10 Rear Sway Bar Set - S10 Main Gear 68T - S10 3x30mm Hinge Pin (4pcs) - S10 120926...
  • Seite 20 PARTS LIST 132720 120995 120946 120947 Servo Horn Plastik (4Stk.) - S10 M3x10mm Madenschraube (10Stk.) - S10 LRP Servo R-7020, 3kg S10 Blast Standard Motor 20.500rpm Servo Arm Plastic (4pcs) - S10 M3x10mm Set Screw (10pcs) - S10 120948 120949 120950 120951 M3x3mm Madenschraube (10Stk.) - S10...
  • Seite 21 Dämpferbefestigungsspacer (10 Stk.) - S10 Radmitnehmerstifte (10Stk.) - S10 Dekorbogen S10 Blast TX - 1/10 Truggy LRP A2-RX Sport II 27Mhz AM 2-Kanal Empfänger Upper Shock Mounting Spacer (10 Stk.) - S10 Wheel Adapter Pins (10pcs) - S10 Decalsheet S10 Blast TX - 1/10 Truggy...
  • Seite 22 EXPLOSIONSZEICHNUNG EXPLODED VIEW 120960 120924 120919 120991 120934 120995 120924 120913 120940 120932 120987 120960 120916 132720 120963 120942 120916 120946 122015 120987 120943 120916 122108 120903 120915 120901 120900 120903 120905 120980 120963 120925 120909 120962 122105 122100 122108 120915 120926 122100...
  • Seite 23 122105 22016 122101 120906 120926 120913 120997 120986 120929 120915 120925 120942 120984 120981 120909 120931 120935 120933 120910 120914 120963 122014 120931 120960 120963 120985 120912 120911 122014 120983 120963 120960 P . 23...
  • Seite 24 TEILELISTE PARTS LIST 120900 120901 120902 120903 Differentialsatz komplett (1 Stk.) - S10 Kegelrad 13Z. (2Stk.) - S10 Differentialausgänge v+h Diff. (2Stk.) - S10 Getriebegehäuse (1Stk.) - S10 Complete Differential Set (1 pc.) - S10 Diff Pinion Gear 13T (2pcs) - S10 Differential Outdrives front+rear (2pcs) - S10 Gear Box (1pcs) - S10 120904...
  • Seite 25 122015 S10 Blast Standard Motor Servo Horn Plastik (4Stk.) - S10 Speichen Felge weiss (2 Stk.) - S10 MT LRP Servo R-7020, 3kg 20.500rpm Servo Arm Plastic (4pcs) - S10 Spoke Wheel white (2 pcs) - S10 MT P . 25...
  • Seite 26 TEILELISTE PARTS LIST 122016 122101 120948 120949 M3x3mm Madenschraube (10Stk.) - S10 M3x18mm Zylinderschraube (10Stk.) - S10 VTEC 1/10 Reifen+Einlagen (2Stk.) - S10 MT Stoßfänger Plastikteile hinten - S10 MT VTEC 1/10 Tyre+Inserts (2pcs) - S10 MT Rear Bumper Plastics - S10 MT M3x3mm Set Screw (10pcs) - S10 M3x18mm Socket Cap Screw (10pcs) - S10 120950...
  • Seite 27 122013 122012 Dekorbogen (1 Stk.) - S10MT LRP A2-STX Pro 2.4GHz Fernsteuerungs-Set LRP A2-RX Sport II 27Mhz AM 2-Kanal Empfänger LRP A2-STX Sport II 27Mhz AM 2-Kanal Fernst. Decalsheet (1 pc.) - S10MT LRP A2-STX Pro 2.4GHz Radio-Set LRP A2-RX Sport II 27Mhz AM 2-Channel Receiver LRP A2-STX Sport II 27Mhz AM 2-Channel Radio P .
  • Seite 28 EXPLOSIONSZEICHNUNG EXPLODED VIEW 1209 122125 120995 120994 122016 120916 122025 122018 120940 120931 120932 120960 122121 122024 122133 132720 122122 122019 120946 120943 122132 120903 120916 122019 122211 120900 122127 120903 120915 120112 120963 122014 122121 120978 122126 120962 120120 122123 120915 120926...
  • Seite 29 120127 120113 0960 122025 122024 122124 120978 120926 122023 122018 122131 122126 120942 120915 120915 120931 122129 122023 122017 122130 122015 120935 120931 120963 120960 122133 120912 122023 120911 120960 122128 120963 P . 29...
  • Seite 30 TEILELISTE PARTS LIST 120900 122111 120902 120903 Differentialsatz komplett (1 Stk.) - S10 Kegelrad 13Z. (2Stk.) - S10 TC Differentialausgänge v+h Diff. (2Stk.) - S10 Getriebegehäuse (1Stk.) - S10 Complete Differential Set (1 pc.) - S10 Diff Pinion Gear 13T (2pcs) - S10 TC Differential Outdrives front+rear (2pcs) - S10 Gear Box (1pcs) - S10 120904...
  • Seite 31 Servo Saver Post (2pcs) + blau/weiß | blue/white - S10 TC | 122135 S10 Blast Standard Motor Ball Bearing (4pcs) - S10 unlackiert | Crystal Clear - S10 TC | 122136 LRP Servo R-7020, 3kg 20.500rpm 120946 122024 122025 120947 Servo Horn Plastik (4Stk.) - S10...
  • Seite 32: Parts Listing

    TEILELISTE PARTS LISTING 120948 120949 122137 120951 M3x3mm Madenschraube (10Stk.) - S10 M3x18mm Zylinderschraube (10Stk.) - S10 M3x12mm Zylinderschraube (10Stk.) - S10 M3x16mm Senkkopfschraube (10Stk) - S10 M3x3mm Set Screw (10pcs) - S10 M3x18mm Socket Cap Screw (10pcs) - S10 M3x12mm Socket Cap Screw (10pcs) - S10 M3x16mm Countersunk Screw (10pcs) - S10 120952...
  • Seite 33 122013 87211 Differential Dichtungssatz (2Stk.) - S10 Federteller Satz (4Stk.) - S10 LRP A2-RX Sport II 27Mhz AM 2-Kanal Empfänger LRP A3-RX Deluxe 2.4GHz Empfänger Differential Sealing Set (2pcs) - S10 Springplate Set (pcs) - S10 LRP A2-RX Sport II 27Mhz AM 2-Channel Receiver LRP A2-RX Deluxe 2.4GHz Receiver...
  • Seite 34: Sport- Und Pro Tuning

    SPORT- UND PRO TUNING SPORT- AND PRO TUNING AKKU BATTERY MOTOR MOTOR REGLER #71145 / #79867 #50662 #80700 SERVO SERVO FERNSTEUERUNG TRANSMITTER LADEGERÄT CHARGER #132740 #87000 #41281 AKKU BATTERY MOTOR MOTOR REGLER #71115 / #79890 / #45050 #58174 / #50360 #83200 / #80150 FERNSTEUERUNG TRANSMITTER...
  • Seite 35 P . 35...
  • Seite 36 P . 36...
  • Seite 37 P . 37...
  • Seite 38 P . 38...
  • Seite 39 P . 39...
  • Seite 40 P . 40...
  • Seite 41 P . 41...
  • Seite 42 P . 42...
  • Seite 43 P . 43...
  • Seite 44 P . 44...
  • Seite 45 P . 45...
  • Seite 46: Installation

    AI RUNNER REV. REGLER AI RUNNER REV. SPEEDO EINBAUTIPPS INSTALLATION TIPS - Befestigen Sie den Regler mit beigelegtem, doppelseitigem Klebeband. - Sorgen Sie für ausreichende Kühlöffnungen in der Karosserie; dies erhöht die Leistungsfähigkeit und Lebensdauer aller elektronischen Komponenten. - Platzieren Sie den Regler an einer crashgeschützten Stelle. - Der Regler sollte so eingebaut werden, dass ein leichter Zugang zu den Steckern gewährleistet ist.
  • Seite 47: Troubleshooting Guide

    AI RUNNER REV. REGLER AI RUNNER REV. SPEEDO INBETRIEBNAHME CHARGING Nach Einschalten des Fahrtenreglers ist Ihr Regler betriebsbereit. Ein Setup muss nicht durchgeführt werden. Der Regler „lernt“ bei der Fahrt den Neu- tral-, Vollgas Vorwärts- und Vollgas Rückwärts-Punkt. Bitte beachten: Beim Anstecken des Fahrakkus muss der Sender in Neutralposition stehen und es sollte in Fahrtrichtung des Modells losgefahren werden.
  • Seite 48: Allgemeine Gewährleistungs- Und Reparaturbestimmungen

    Otherwise, no warranty can be granted. For quick repair- and return service, add your address and detailed description of the malfunction. If LRP no longer manufactures a returned defective product and we are unable to service it, we shall provide you with a product that has at least the same value from one of the successor series.
  • Seite 49: Warning Notes

    - Lassen Sie das Produkt niemals unbeaufsichtigt, solange es eingeschaltet, - Never solder a Schottky diode to the motor when you are using an LRP in Betrieb oder mit einer Stromquelle verbunden ist. Im Falle eines Defekts A.I.Runner series speed-control.
  • Seite 50: Lrp Racing Stickpack

    NiMH 20mV Please note: You can use your LRP Wild, Power und Hyper Packs up to 3-times per day. Pay attention, that the battery pack has cooled down complete- ly before beginning the charge. * C=Nominal capacity of the battery. E.g. with a nominal capacity of 1600mAh (1.6Ah), the battery can be charged with a max. current of 1.6A.
  • Seite 51 Minuten herausgestellt. Sie können den Akku dann für mehrere Wochen ohne Probleme lagern. Lagern Sie den Akku an einem möglichst kühlen Ort. If you are not using your LRP High Power Racing Stickpack battery for several days/weeks, under no circumstances it shall be stored fully discharged.
  • Seite 52 Otherwise, no warranty can be granted. For quick repair- and return service, add your address and detailed description of the malfunction. If LRP no longer manufactures a returned defective product and we are unable to service it, we shall provide you with a product that has at least the same value from one of the successor series.
  • Seite 53 LRP does not do a warranty change of the whole product, once the product has been used. Do not send in the whole product. Only send in the defective parts, on which you want to claim warranty. If the whole product is send in, LRP will charge a service fee for the Disassembly and Assembly of the product at our discretion.
  • Seite 54: Garantie- Und Warnhinweise

    GARANTIE- UND WARNHINWEISE deutsch Kein Spielzeug. Nicht für Kinder unter 14 Jahren geeignet. Bewahren Sie das Produkt außerhalb der Reichweite von kleinen Kindern auf. Beachten Sie unbedingt die folgenden Hinweise, da diese Ihr Produkt zerstören können und die Gewährleistung ausschließen. Nichtbeachtung dieser Hinweise können zu Sach- und Personenschäden und schweren Verletzungen führen! Lassen Sie das Produkt niemals unbeaufsichtigt, solange es eingeschaltet, in Betrieb oder mit einer Stromquelle verbunden ist. Im Falle eines Defekts könnte dies Feuer am Produkt oder seiner Umgebung verursachen.
  • Seite 55 WARANTEE AND WARNING NOTES russisch rumänisch portugiesisch o produto da fonte de energia, sempre que o produto não estiver a ser utilizado. Carregue sempre o acumulador, necessário para o funcionamento deste produto, fora do aparelho. Se o acumulador estiver avariado pode causar danos no produto. Não deite baterias usadas no lixo doméstico, coloque-as sim no pilhão ou deponha-as nos Ecopontos.
  • Seite 56 LRP electronic GmbH, Wilhelm-Enssle-Str. 132-134, 73630 Remshalden, Deutschland Technik + Service Hotline für D: 0900 577 4624 (0900 LRP GMBH) (0,49eur/Minute aus dem deutschen Festnetz, Mobilfunkpreise können abweichen) Technik + Service Hotline für A: 0900 270 313 (0,73eur/Minute aus dem österreichischen Festnetz, Mobilfunkpreise können abweichen)
  • Seite 57 Schnell – einfach – zuverlässig Ersatzteilbestellung bei Conrad Electronic Für viele Artikel können wir schnell und zuverlässig Ersatzteile liefern. Unser Lager hält im Bedarfsfall mehrere Tausend Teile für Sie bereit. Bestellung per Telefon: 0180 - 531 21 11* Bestellung per Telefax: 0180 - 531 21 10* Bestellung per Mail: sales@conrad.de Bestellung per Internet:...

Diese Anleitung auch für:

S10 blast txS10 blast mtS10 blast tc

Inhaltsverzeichnis