Display System; Cleaning And Maintenance - Bresser 40-25810 Bedienungsanleitung

display system

1. symbol for aim (Fig. 2, 1). The object to be measured should be aimed at the inner circle.
2. distance display (Fig. 2, 4). The distance is indicated with three digits. If "- - - -" is shown, no distance can be
measured.
3. distance unit: "M" (Meters; Fig. 2, 2) or "Y" (Yards; Fig. 2, 3).

cleaning and maintenance

Remove the device from it's energy source before cleaning (remove battery).
Lenses (eyepieces and/or object lenses) should be cleaned with a soft, lint-free cloth (e.g. microfibre)
only. Do not use excessive pressure - this may scratch the lens.
Dampen the cleaning cloth with a spectacle cleaning fluid and use it on very dirty lenses.
Protect the device from dust and moisture. Store the device in the bag supplied or in its original
packaging. Batteries should be removed from the device if it is not going to be used for a long period
of time.
The mode button ("MODE") and the triggering button ("ON/MEASURE") should not be pressed at the
same time, or it may cause trouble.
- 16 -