FLORABEST 85897KASR Montageanleitung Seite 6

Assembly / Storage and Care / Service / Disposal
Insert the screw with spring ring, washer and
rubber washer into the base from below.
1
Use the centre hole. Please note the position
of the washers (see Fig. A)!
Place the large rubber washer
screw protruding at the top (see Fig. B).
Secure the screw
1
key and place the stand tube
screw from the top, and slightly screw in.
1
Align the rubber washer
tube . Tighten the stand tube
3
socket key (see Fig. C).
Note: The clamping plate
to protect the umbrella pole (see Fig. D).
Please do not remove.
Using inserts
Use the inserts to match the size of your
5
umbrella pole.
Insert the necessary inserts
tube
. The groove of the respective insert is
3
intended to leave room for the clamping plate
(see Fig. E).
Insert the patio umbrella. Firmly secure the
wing bolts (see Fig. F).
6
Storage and Care
The granite stand is maintenance-free.
If necessary, remove any dirt with warm soapy
water.
Retighten screws as necessary.
Store granite stand in a dry location during
periods of non-use, e.g. over winter.
Stainless steel parts:
Please treat the stainless steel tube with an
automotive chrome care product or stainless
steel care lotion as necessary.
6 GB/IE
over the
2
from below using a socket
onto the
3
below the stand
2
with the
3
is premounted
4
in the stand
5
Service
SunRain Handels GmbH
Bahnhofstrasse 63
A-4910 Ried-Austria
gardenservice@gmx.at
IAN 106209
IAN 106208
For all inquiries about your product, please have
your receipt and the article number (e.g. IAN
12345) ready as your proof of purchase.
Disposal
The packaging is made of environmentally friendly
materials, which may be disposed of through your
local recycling facilities. Please dispose of this
4
product at the end of it's useful life.
Granite Parasol Stand
square
Granite Parasol Stand
round