Product Description; General Functions And Area Of Application; Power Supply Specifications; Safety Information - Weka 593.4050 Serie Montageanleitung

4. Product description

4.1. General functions and area of application

The pool is intended to be assembled in the open air for swimming.
4.2. Dimensions
593.4050
593.5060

4.3. Power supply specifications

Plant room sign: with rating plate (only when plant room included)
The rating plate is to be fixed in accordance with the assembly instructions.
Rated power:
Energy consumption:
For precise data, cf. electrical installation instructions – MA Art.-Nr.: 800.0286.12.24

4.4. Safety information

Risk of flooding
When selecting the location, ensure that, in the event of a water leak, the water can drain away unhindered
and without causing damage.
Installing the pool on slopes
The slope side facing the pool must either be supported with a shallow escarpment or a wall. Under no
circumstances may the swimming pool support the slope with its wall.
Please ensure that creating a shallow escarpment will ensure that the pool cannot be washed away by
rainwater. Drainage is to be arranged for any ground or strata water which accumulates. Obtain information
about the substrate before selecting the location.
Selection of the substrate
The ground under the swimming pool should be level, horizontal and built up. If your pool is located near
slopes and basements, you should consult a local builder. Otherwise, there may be a risk of collapse.
Built-up ground must be compressed to ensure that the swimming pool does not sink, otherwise damage or
serious accidents may occur.
The ground must be cleared of objects (e.g. stones) which could damage the PVC inner liner (risk of leak).
Any turf must also be removed.
Technische Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.
Dimensions [cm]
W/L/H
376 x 476 x 116
471 x 571 x 116
230 V, 50 Hz
IP X4 protection rating
max. 0.37 KW
17
 Copyright HRB 3662