Herunterladen Inhalt Inhalt Diese Seite drucken

Explanation Of Symbols; Disposal; Maintaining The Unit - uebe visocor OM50 Gebrauchsanweisung

Das oberarmblutdruckmessgerät
Vorschau ausblenden Andere Handbücher für visocor OM50:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

E
Technical information

6. Explanation of symbols

This product complies with the Council Directive 93/42/EC from 5 September 2007 regar-
ding medical devices and bears the mark CE 0123 (TÜV SÜD Product Service GmbH).
0123
Degree of protection against electric
shock: TYPE BF
Please observe instructions for use
Keep dry
Protected against solid foreign particles
IP20
with a diameter of more than 12.5 mm,
no protection against water.
Manufacturer
50 °C
Storage and transportation conditions
-20 °C
Ambient temperature -20 to +50 °C
85%
Relative humidity up to 85 %,
non-condensing
0%

7. Disposal

Batteries and technical appliances must not be disposed of with domestic waste, but should be
handed in at the appropriate collection and disposal points.
EN-58
Serial number
Reference number = item number
Mains adapter specifications:
If using the optionally available mains adapter:
Equipment class II (double-insulated)
Internal fuse
For indoor use only
Internal polarity positive

Maintaining the unit

• The unit contains sensitive parts and must be protected against strong variations in temperature, air
humidity, dust and direct sunlight.
• Make sure when storing the unit that no heavy objects are left lying on the unit or on the cuff and
that the air hose is not kinked.
• The unit is neither impact-resistant nor shock-proof. We recommend that you have the intactness and
accuracy of the display checked after heavier falls or impacts.
• The unit is not waterproof.
• If the unit becomes dirty during use, use a soft, dry cloth to clean the unit. Do not use benzene, thin-
ners or other strong solvents.
• Do not scrub or machine-wash the cuff. If the cuff gets dirty during use, use a synthetic cleaner and
softly rub the surface.
• If the unit has been opened, it must be subjected to a metrological inspection conducted by an
authorised organisation.
• Make sure that liquid cannot get into the air hose. Dry thoroughly.
F
Maintaining the unit
EN-59

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis