Operating Notes; Optimum Placement Of The Easyport; Avoiding Feedback; Cleaning - Fohhn FP-11 Bedienungsanleitung

6. Operating Notes

6.1 Optimum Placement
In order to ensure consistent coverage and intelligibility from the
first to the last row of the auditorium,
1. Place the EasyPort® FP-11 as high as possible using a
loudspeaker stand.
2.
Check that loudspeaker is clearly visible from each seat or
standing room area and that the sound will not be absorbed by
people or objects.
To optimally align the EasyPort® FP-11, you can use the
3.
optional SHP1 stand adapter:
1. Mount the loudspeaker on the stand adapter.
2. Place the loudspeakeradapter on the loudspeaker stand.
3. Extend the stand to its full length and aim the
loudspeaker down at the audience in the same way you
woud aim a spot-light to cover the entire audience.

6.2 Avoiding Feedback

When using your EasyPort® FP-11 with a wired or wireles
microphone, acoustic feedback may occur so the loudspeaker would
start whistling or howling. To prevent feedback.
1. Make sure the talker will stand behind the loudspeaker in order
to prevent feedback.
2. Make sure never to point the microphone element directly at
the loudspeaker.
3. Hold the handheld transmitter by the shaft. Be sure not to
cover the microphone element with your hand.
4. Should the loudspeaker start whistling or howling at the same
turn the VOLUME control down CCW to the point that the
feedback noise will stop.

7. Cleaning

You can clean the loudspeaker enclosure with a moistened cloth.
Make sure that liquid will not penetrate into the case.
26 | FP-11