4.6 GLASS ASSEMBLY
Before installing the shielding tubes place carefully the glass (1) on the
body of the hood (2) from the top, and attach to the body of the hood using the
screws (3) M4x20 (Fig.7)
When attaching the screw M4x20 (3) install a conical washer (2) and then the
rubber gasket (1) and screw the glass to the body of the hood (Fig.8)
Fig.7
Fig.8
5. SERVICE
5.1 CONTROL PANEL
The range of hoods WK-6 is fitted with a display (Fig.9).
A
B
C
D
E
F
Fig.9
Control (Fig.9):
A – remote control LED
B – timer
C – minus
D – display
E – plus
F – lighting