Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
4.0 General safety instructions
è Do not leave the running machine, leave only in case of stand-still of the machine.
è Take attention to the instructions of the manufacturer regarding working material and highest speed,
max feed, using of cooling materials and clamping device of the workpiece.
è Only for original ,,FLOTT" spare parts we will take over the guarantee of a trouble-free factory.
è Before changing the grinding belt or opening the machine disconnect the machine from the mains
power supply!
è Before starting the machine connect all safety devices!
è The machine should be connected to the main power supply as indicated on the machine information
plate.
è Without supervisi on the machine should be unplugged.
è The machine operator should wear tight - fitted clothes. Long sleeves should be rolled up, jewelry and
neckties should be removed prior to operation. Long hair should be tight up or covered.
è Use grinding belts according to the material to be grinded.
è Cracked or deformed grinding belts should not be used.
è The machine should be positioned and screwed on a level surface.
è Before mounting the sanding belts have to be checked.
è Use ear protections!
è Only grind and trim degreased parts. Danger of fire!
è Clean dust bag and filter regularly. Danger of fire!
è Grinding and polishing of aluminium parts and its alloys
Raised aluminium and magnesium dust can cause explosions, if there is an ignition source, like sparks or a
burning cigarette.
Hence it is necessary to exhaust the grinding dust with a seperate extraction system and to prevent
deposition of dust in the tubes.
Alternating grinding of spark arcing and non spark arcing materials is only permitted on especially
furnished grinding equipment. The grinding equipment must be provided with seperate grinding areas and
an extraction systems for the different dusts. In addition particular maintenance and purging intervals have
to be observed. Grinding equipment for alternated grinding must be flagged accordingly.
Information on necessary particular protective measures for the grinding of aluminium and its alloys can
be given at the competent offices of Technical Control of the respective employer´s liability insurance
associations. Details can also be viewed in the guidelines for reporting the dangers of dust fires and dust
explosions when grinding, brushing or polishing aluminium and its alloys (ZH 1/32).
10
371476 D/GB
Werbung
