General; Identification; Product Mark And Model Designation - Weka 1432 Gebrauchsanleitung

2.2. Warranty terms of weka Holzbau GmbH
We guarantee the function of our products for 5 years from the date of delivery based on the following conditions
– however only on the wooden parts of our products (hereinafter weka product) and not on connected
components or parts of the weka product made of another material besides wood. Within the warranty period
defective parts or missing parts of the product or the product itself will be replaced at our discretion. The warranty
extends only to the free-of-charge replacement of the respective faulty or defective wooden part. The warranty
does not cover any consequential or additional costs, in particular no delivery and installation or modification
costs.
The warranty is void in case of:
failure to follow the assembly instructions,
-
changes (additions or modifications) made to the product diverging from the assembly instructions,
-
load limits (e.g. snow load, etc.) having been exceeded,
-
the weka product having been installed on an incorrect foundation or floor plate, etc., in particular in case
-
of violation of the rules of architecture,
lack of or insufficient care of the wood (maintenance measures such as preservation or painting of the
-
wood),
wind speeds stronger than force 7 (moderate gales), natural catastrophes or brute force having caused
-
the damage to the weka product,
- the deficiency consisting in changes which are typical for wood, such as discoloration, formation of
cracks, warping, shrinking, swelling or similar normal effects on the material "wood".
Warranty claims must be accompanied by the original packing slip and the original sales receipt and must be
submitted within the warranty period in writing or by fax or e-mail. A further prerequisite for a claim is the
immediate notification of the defect or damage in the form of pictures and a written description of the defect.
Address all warranty claims to:
weka Holzbau GmbH, Johannesstraße 16, 17034 Neubrandenburg
Fax: 0395/42908-83; E-mail: info@weka-holzbau.com
2.3. Assembly conditions for a weka assembly team
If you wish for help assembling your cabin and choose to employ a weka assembly team, weka Holzbau GmbH
will carry out the following services for you:
Assembly means putting together (installation) of the individual parts supplied. It does not include treating them
with a wood protection agent, the delivery and assembly of accessories and accessory parts. Electrical
connections are not included in the assembly service.
The items to be assembled must be located at the installation site/location/base area. Transport of the article or
the individual parts over a distance greater than 5 m or to another level is not included in the assembly price
quoted. The substrate must be stable, horizontal and level.
In the event of doubt, reference should be made to DIN 18202 'Level tolerances in building construction', tab. 3,
row 3, with a maximum height difference at the furthest points of approx. 10 to 11 mm.
All preparatory work must have been carried out in accordance with the technical regulations before assembly
begins. The substrates/floors/foundations constructed or selected by you must be suitable for the assembly.

3. Identification

3.1. Product mark and model designation

Log cabins in Nordic spruce with 21, 28 and 45 mm wall thicknesses

General

All wood parts in Nordic spruce
Floor
Substructure of pressure-treated floor beams
19 mm thick tongue and groove floorboards
Techn. Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.
10
 Copyright HRB 3662