1. Einführung
1.4 System components
Open box and remove the control unit, cables and packing material. Lift the antenna
straight up out of the box. Never place the system upside down!. When you lay down
the antenne, pmake sure that the cable attached to the antenna not be below the base
plate to prevent damages.
Warning:
The Caravanman 85 Professional has an additional Auto Skew function that ad-
just the polarization angle of the LNB automatically, and a additional connecti-
on for a second set-top box.
04
Antenna unit
The 85 cm (or 65 cm) wide dish is screwed in a few steps to the
motor unit, thus forming the complete antenna unit. The mirror
is mounted only after the installation of the motor unit.
Control unit
The control unit is used for satellite selection and control. It is
connected between the antenna and the set-top box and sup-
plied the antenna with electricity. After successful alignment,
the device switches off automatically.
ENGLISH